Schneider Electric TESYS™ LU2B12FU Reversing Power Base, For Use With Combination Motor Starters, 110 to 240 VAC/VDC, 12 A, 1.7/2 W, 50/60 Hz, 3-Poles, 1NO-1NC
Details
Approvals:
ABS, ASEFA, ATEX, BV, CCC Certified, CSA C22.2 No. 14 Type E, DNV Certified, EN 60947-6-2, GL, GOST Certified, IEC 60947-6-2, LROS Certified, UL 508
Dimensions:
8.82 in H x 1.77 in W x 4.96 in D
Subtype:
Motor Components & Supplies
Manufactured By:
Schneider Electric Square D
Other Details
-13 to 140 deg F with LUCM/-13 to 158 deg F with LUCA, LUCB, LUCC, LUCD
1 kV serial mode conforming to IEC 60947-6-2, 2 kV common mode conforming to IEC 60947-6-2 non-dissipating shock wave, 10 V conforming to IEC 61000-4-6 immunity to radio electric fields
1/2 hp at 1 phase 120 VAC, 2 hp at 1 phase 240 VAC, 10 hp at 3 phase 575 VAC, 3 hp at 3 phase 208 VAC, 3 hp at 3 phase 220/240 VAC, 7.5 hp at 3 phase 460 VAC power rating
10 kA 500 V, 4 kA 690 V, 50 kA 230 V, 50 kA 440 V rated service breaking capacity
1000 mA at 110 to 220 VDC I maximum while closing, 1000 mA at 110 to 240 VAC I maximum while closing typical current consumption
150 ms with change of direction power circuit, 35 ms opening with LUCA, LUCB, LUCC, LUCD, LUCM control circuit, 70 ms closing with LUCA, LUCB, LUCC, LUCD control circuit, 75 ms closing with LUCM control circuit, 75 ms without change of direction power circ
15000000 cycles mechanical durability, 60 cycles/min operating rate, 6 kV conforming to IEC 60947-6-2 rated impulse withstand voltage, 600 V conforming to CSA C22.2 No 14, 600 V conforming to UL 508, 690 V conforming to IEC 60947-1 3 rated insulation
2 W for control circuit with LUCA, LUCB, LUCC, LUCD, 1.7 W for control circuit with LUCM heat dissipation
Control circuit: 7.08-10.62 lbf.in- with screwdriver 0.2 in flat, control circuit: 7.08-10.62 lbf.in - with screwdriver 0.2 in Philips no 1, power circuit: 16.81-22.12 lbf.in- with screwdriver 0.24 in flat, power circuit: 16.81-22.12 lb
IP20 front panel and wired terminals conforming to IEC 60947-1, IP20 other faces conforming to IEC 60947-1, IP40 front panel outside connection zone conforming to IEC 60947-1 IP degree of protection
Suitability for isolation
TH conforming to IEC 60068 protective treatment
