Designed for use on the arm of a steel pole, the Steel Arm Yoke mountsover a .75-inch-thick end plate as shown at left. Swivel castings in theend of the yoke assure proper alignment of the Chance Strain Poles tothe conductor-end yoke. The load rating is dependent upon the angle oftheend plate on the arm; 45 is maximum angle allowed with a maximum loadof 9,000 pounds. In-line loading of the yoke permits a maximum loadof 15,000 pounds. Bronze pins place the strain poles 21 inches apart, center-to-center. A lifting eye is cast into the top of the yoke for thepurpose of landing theyoke upon the end plate of the pole arm.
