3M™ Rejacketing Sleeves RJS Series are designed so that 3M™ Cold Shrink QT-III and Q-TIII Silicone Rubber Terminations can be used on 3/C (three conductor) medium voltage shielded power cables of tape shield, wire shield, armoured and non-armoured configurations. Rejacketing sleeves are designed to protect the phase legs (core) of 3/C shielded power cable from exposure to moisture, corrosion, ozone, ultra-violet radiation, physical contact and other hazards that are associated with termination operating environments. Rejacketing sleeves are to be used in conjunction with 3M™ Cold Shrink Breakout Boots and Silicone Rubber Terminations. The 3M™ Rejacketing Sleeve RJS-1 has a metallic shield diameter range of 0.43-0.6 inch (10.9-15.2 mm), a voltage range of 3.3-8 kV, and one 10-foot (3 m) coil per case.
Details
Dielectric Strength (V/mil):
Inner Diameter After Shrink (Imperial):
Inner Diameter After Shrink (Metric):
Inner Diameter Before Shrink (Imperial):
Inner Diameter Before Shrink (Metric):
Metallic Shield Diameter Range:
Operating Temperature (Celsius):
Operating Temperature (Fahrenheit):
Overall Length (Imperial):
Product Type:
Splice Jacketing and Rejacketing Kits
RoHS EU Comments:
Contact 3M for information
Tensile Strength (Imperial):
1058 Pound-Force Per Square
Unit of Use - Customary Net Weight:
Unit of Use - Item Quantity:
Unit of Use - Total Unit Quantity:
Other Details
Comes in one 10-foot (3 m) coil
Designed to be used in conjunction with 3M™ Cold Shrink Breakout Boots and 3M™ Silicone Rubber Terminations
Easy to adjust sleeve length
Excellent resistance to ozone and ultra-violet radiation
heat or special tools required
Installs quickly and accommodates a wide range of cable sizes
Seals tight and retains resiliency and pressure
